Konica Minolta SD-501 - Manual (Page 38)

3-2
Finisher Adjustment Outlines
Use this function to make the following fine adjustments on SD-501 Saddle Stitcher.
• See POD Administrator’s reference for the adjustment on finishing options
other than the saddle stitcher.
• The target adjustment items vary depending upon the configuration of
installed options.
01 Stapling Center Adjustment
Adjust the dislocation of the center position of staples.
02 Stapling Paper Width Adjustment
Adjust the dislocation of sheets in the stapled set.
03 Staple Pitch Adjustment
Adjust the pitch between two staples.
04 Folding Position Adjustment
Adjust the double-folding position.
05 Three-Fold Position Adjustment
Adjust the three-folding position.
06 Fold Paper Width Adjustment
Adjust the dislocation between sheets.
07 Trimming Adjustment
Adjust the trim width.