Konica Minolta SD-501 - Manual (Page 39)

3-3
05 Saddle Stitcher Adjustment
01 Stapling Center Adjustment
Perform this adjustment for the center (folding) position of copied/printed sheets and
of staples processed by the SD-501 Saddle Stitcher.
The paper width adjustment (06) and folding position adjustment (04) are supposed
to be completed before this adjustment.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 05 Saddle Stitcher Adj.
2 Touch 01 Stapling Center Adjustment to display the Stapling Center Position
Adjustment Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Select the Fold&Staple mode, then press [Start]. A sample copy will be output.
5 Check misalignment (a) of the folded line and stapling position.
a
[2]
[1]