02 stapling paper width adjustment, 02 stapling paper width adjustment -5, 05 saddle stitcher adjustment (continued) – Konica Minolta SD-501 User Manual

Page 41

Advertising
background image

05 Saddle Stitcher Adjustment (continued)

3-5

02 Stapling Paper Width Adjustment

Perform this adjustment if stapled sheets are not aligned neatly processed by the
SD-501 Saddle Stitcher.

Procedure

1 Touch Adjustment - 02 Finisher Adjustment - 05 Saddle Stitcher Adj.
2 Touch 02 Stapling Paper Width Adjustment to display the Staple Paper Width

Adjustment Screen.

3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, select Fold&Staple and

then press [Start]. A sample pattern (No. 16) will be output.

5 Check misalignment (a), in which misalignment occurs if the paper width setting

is larger than the actual width, or paper curving (b), in which a sample set is
curved if the paper width setting is smaller than the actual width has occurred.

a

b

Advertising
This manual is related to the following products: