Konica Minolta SD-501 - Manual (Page 47)

05 Saddle Stitcher Adjustment (continued)
3-11
05 Three-Fold Position Adjustment
Perform this adjustment for the three-folding positions processed by the SD-501
Saddle Stitcher.
• When adjusting both Single Fold and Double Fold, be sure to start with the
Double Fold adjustment.
• The baseline of Single Fold is calculated from the edge of the sheet, while
that of Double Fold is calculated from the position of the first fold line,
therefore a distance (b) in step 5 will be altered by changing the position of
either Single Fold or Double Fold.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 05 Saddle Stitcher Adj.
2 Touch 05 Three-Fold Position Adjustment to display the Three-Folding Position
Adjustment Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, specify Multi Letter, then
press [Start]. A sample pattern (No. 16) will be output.