Konica Minolta FK-502 - Manual (Page 188)

Useful transmission functions 6
C451 6-28
5
Select the desired end settings and touch [OK].
– Enter the desired number of copies with the keypad to specify the
number of copies.
– When [C] (clear) key is pressed, the number of copies return to 1.
– Touch [1-Sided] or [2-Sided] to specify Simplex/Duplex printing.
– Touch [Corner] or [2 Position] to specify the staple margins and
touch [None] to cancel the staple margins.
6
Touch [Close].
Returns to Scan Settings screen.
7
Touch [OK].
Returns to Fax/Scan screen.
8
Set other functions if required.
– For details on Scan Settings, refer to “Specifying scanning condi-
tions” on page 2-12 or “Scan Settings” on page 6-2.
– For details on Original Settings, refer to “Original Settings” on
page 6-4.
– For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
9
Specify the destination.
– For details on specifying destination, refer to “Specifying only one
destination” on page 2-17 and “Specifying multiple destinations
(Sequential broadcast transmission or broadcast transmission)” on
page 2-31.