Konica Minolta FK-502 - Manual (Page 389)

Utility mode 10
C451 10-83
4
Touch [PC-FAX RX Setting].
5
Select the [Allow].
– [Restrict]: PC-FAX is not received
– [Allow]: PC-FAX is received even if any of the fax number or PC-FAX
number is received and received originals are saved in Specified
User Box.
6
Select the box in which original received by PC- FAX is saved by “Re-
ceiving User Box Destination”.
– [Memory RX User Box]
It forwards to forced memory reception box.
– [Specified User Box]
It forwards by F-Code (SUB address), which specifies the sending
side.
– For the operation at the time of PC-FAX RX, refer to “PC-FAX RX
function operations” on page 1-14.
7
Whether the fax original is printed after reception is specified by “Print”.