Konica Minolta FK-502 - Manual (Page 267)

Registering/Specifying Settings 9
C451 9-7
6
Touch [Fax Number], enter the fax number of the destination on the
keypad.
– Numbers of up to 38 digits can be entered.
– If there is a wrong entry, delete 1 character at a time by touching
[Delete] or delete all by pressing [C] (clear) key and correct the en-
try.
– [Tone] : If pulse dialing is being used, touch this button to send a
push-button tone. Use Tone when fax information service is being
used. Tone is displayed as “T” on the screen.
– [Pause] : Touch this button to insert a pause when dialing. Touch
[Pause] once to insert a 1-second pause. In addition multiple paus-
es can be entered. It is displayed as “P” on the screen.
– [-] : Touch this button to insert a delimiter during dialing. It has no
effect on the dialing. It is displayed as “-” on screen.
– [ →] : Moves the cursor to the right.
– [ ←] : Moves the cursor to the left.
– [Delete] : The characters before the cursor are deleted one by one.
– [Outside] : When [PBX Connection Setting] are valid, [Outside] is
displayed and the outside line can be specified. If selected, it is dis-
played as “E-”.
– When [PBX Connection Setting] are valid, and a transmission is to
be sent from an extension line to the outside line, touch [Pause] af-
ter the outside line access number such as “0” for more secure di-
aling. It is displayed as “P” on the screen.
7
For specifying line settings, touch [Line Settings], specify the function
and then touch [OK].
8
Touch [ ↑] or [↓].
9
Touch [Index], and then specify the index characters.