Konica Minolta FK-502 - Manual (Page 225)

Useful transmission functions 6
C451 6-65
6
Enter the password (Maximum 20 digits) with the keypad.
– Numbers 0-9 and # and * can be entered for the password.
– If an incorrect number has been entered, touch [Delete] and then
correct the number.
– When [C] (clear) key is pressed, all entered contents are deleted.
– Touch [No] to cancel the settings.
7
Touch [OK].
Returns to the Communication Method Settings screen.
8
Touch [OK].
Returns to Communication Settings screen.
9
Touch [Close].
Returns to Fax/Scan screen.
10
Set other functions if required.
– For details on Scan Settings, refer to “Specifying scanning condi-
tions” on page 2-12 or “Scan Settings” on page 6-2.
– For details on Original Settings, refer to “Original Settings” on
page 6-4.
– For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
11
Specify the destination.
– For details on destination, refer to “Specifying only one destination”
on page 2-17, “Specifying multiple destinations (Sequential broad-
cast transmission or broadcast transmission)” on page 2-31.