Konica Minolta FK-502 - Manual (Page 173)

Useful transmission functions 6
C451 6-13
6.4 Sending the fax after removing the black shadow
(Frame Erase)
Frame Erase
When original is scanned while the ADF is open, there may be a black shad-
ow around the original at the time of scanning the booklet original and the
original may be faxed with the black shadow. Frame Erase is a function that
erases the black shadow on Top, Bottom, Right, and Left sides of the original
when a booklet is scanned.
2
Note
Can be used in both original glass and ADF.
The frame erase quantity can be set within a range of 0.1 - 50 mm (1/16
- 2 inch) with a scale of 0.1 mm (1/16 inch).
Initial Frame erase value at the time of procurement: 5.0 mm (3/16 inch)
Following functions cannot be used simultaneously.
Quick Memory TX, Total # of Pages, Polling RX, Bulletin board polling RX
and Long Original.
Ordinary
transmission
Frame erasure
transmission
Width of
erasure