Konica Minolta FK-502 - Manual (Page 183)

Useful transmission functions 6
C451 6-23
6.6 Sending a fax after specifying the scan size of the
original (Scan Size)
Scan Size
Scan Size is a function to send the fax after specifying the scan size of the
original.
When the paper width on the recipient’s side is smaller than the paper size
of the original that is sent, the original is reduced and then printed. When the
original is not to be reduced, and the scan size is specified for the paper size
on the recepient’s side, the original of the original size can be sent.
2
Note
The original scanning position of an original loaded on ADF is different
from the original scanning position of an original loaded on original glass.
When Scan Size and Mixed Original setting are specified at the same
time, the size specified in Scan Size setting is applied.
Following functions cannot be used simultaneously.
Quick Memory TX, Polling RX, Total # of Pages and Bulletin board polling
RX
JAPAN CHINA
AUSTRALIA
Indian Ocean
PAPUA
NEW GUINEA
INDONESIA
PHILIPPINES
MONGOLIA
THAILAND
VIETNAM
MALAYSIA
SINGAPORE
BRUNEI
Taiwan
NORTH KOREA
SOUTH KOREA
CAMBODIA
LAOS NMAR
BHUTAN
LADESH
RUSSIA
JAPAN CHINA
PHILIPPINES
GOLIA
LAND
VIETNAM
ALAYSIA
INGAPORE
BRUNEI
Taiwan
NORTH KOREA
SOUTH KOREA
AMBODIA
OS
RUSSIA