Konica Minolta FK-502 - Manual (Page 219)

Useful transmission functions 6
C451 6-59
6.18 Sending the fax after reconfirming the destination
(Destination Check Display Function)
Destination Check Display Function
After pressing [Start] key on completion of destination specification, the des-
tination list screen is displayed with the number of destinations. As the fax is
sent after reconfirming the destination, misdirected transmission due to the
mistake in the destination can be prevented.
!
Detail
[Destination Check Display Function] must be set to [ON] to use the Des-
tination Check Display Function function. For details, refer to “Specifying
the ON/OFF settings of the function (Function ON/OFF Setting)” on
page 10-65.
Sending a fax after reconfirming the destination
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to “Loading the original” on
page 2-7.
3
If necessary, set [Scan Settings], [Original Settings] and [Communica-
tion Settings].
– For details on Scan Settings, refer to “Specifying scanning condi-
tions” on page 2-12 or “Scan Settings” on page 6-2.
– For details on Original Settings, refer to “Original Settings” on
page 6-4.
– For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
4
Specify the destination.
– For details on destination, refer to “Specifying only one destination”
on page 2-17 and “Specifying multiple destinations (Sequential
broadcast transmission or broadcast transmission)” on page 2-31.