Konica Minolta FK-502 - Manual (Page 375)

Utility mode 10
C451 10-69
10.19 Specifying memory reception settings (Memory RX
Settings)
Whether or not to use the Memory RX function is set. When these settings
are valid, password (within 8 digits) used at the time of printing is set.
Memory RX is the function of printing the received original after storing in the
memory for some time and then printing after the receiving such instruction
and not printing it immediately.
Memory RX Setting: (Set password in 8 digits)/No*
* is a default value at the time of procurement.
!
Detail
When the [Memory RX Settings] is [ON], [PC-FAX RX Setting], [TSI User
Box Setting] and [Forward TX Setting] cannot be used.
Refer to “Handling originals received by memory” on page 7-5 for the
printing method etc. of the Memory RX original.
Specifying the Memory RX Settings
1
Display the Administrator Settings screen as described in “Displaying
Administrator Settings screen” on page 10-4.
2
Touch [Fax Settings].
– Some items may not be displayed according to setting options.
– In the Utility mode, the number displayed on button can be entered
and selected on the keypad. For [Fax settings], enter [8] on the key-
pad.