Konica Minolta FK-502 - Manual (Page 401)

Utility mode 10
C451 10-95
10.27 Specifying the extended telephone line parameter
settings (Lines Parameters Setting)
Parameters for extended telephone line are set.
Dialing Method:
European models: PB
North American models: PB*/10pps
-
Sets dial methods of line 2 (extended telephone lines)
Number of RX Call Rings: 0 - 15 times (2 times*)
-
Incoming calls frequency of line 2 (extended telephone lines) is set. The
frequency of pseudo ring-back tones from reception of incoming call till
actual reception is set.
Line Monitor Sound: ON/OFF*
-
When telephone ring is heard from speaker while communicating with
line 2 (extended telephone line), it is set to ON.
* is a default value at the time of procurement.
2
Note
Extended telephone lines can be set only when fax multi line is installed.
Specifying Line Parameter Setting
1
Display the Administrator Settings screen as described in “Displaying
Administrator Settings screen” on page 10-4.
2
Touch [Fax Settings].
– Some items may not be displayed according to setting options.
– In the Utility mode, the number displayed on button can be entered
and selected on the keypad. For [Fax settings], enter [8] on the key-
pad.