6 sending a fax using a program destination, Sending a fax using a program destination -34 – Konica Minolta FK-502 User Manual

Page 89

Advertising
background image

To send a fax

2

C451

2-34

2.6

Sending a fax using a program destination

When a program address has been registered, a fax can be sent by specify-
ing the registered program button.

If transmission settings (Original type and original specification etc.) are reg-
istered by a program key, a fax can be sent by simply touching that button
without the need for specifying function settings each time.

It is also possible to register a group button in 1 program button to send a
fax once or register a time and send faxes at the same time each day.

To send a fax after specifying a program destination

1

Press [Fax/Scan] key, and the Fax/Scan screen is displayed.

2

Load the original to be faxed.

Refer to “Loading the original” on page 2-7 for details on loading
the original.

3

Press [Mode Memory]
key.

4

Touch [Page List].

Advertising
This manual is related to the following products: