Konica Minolta FK-502 - Manual (Page 96)

To send a fax 2
C451 2-41
When there is a memory overflow
When using memory transmission, if the original contains many pages or
when the original contains images with fine details creating a large amount
of data, the memory may became full.
In such cases, set the machine to Quick Memory TX and send the fax (Quick
Memory TX can be set at the Communication Method Settings in the Com-
munication Settings screen).
!
Detail
Refer to “Error Messages” on page 4-5 for procedures when the memory
becomes full.
Refer to “To use quick memory transmission” on page 2-56 regarding
sending a fax using Quick Memory TX.
Original auto rotation
An A4 or 8-1/2 × 11 original loaded in the v orientation is automatically rotat-
ed and sent in the w orientation.
When A4 or 8-1/2 × 11 document pages are loaded in the v orientation to be
sent together with longer document pages, the A4 or 8-1/2 × 11 document
pages are sent without being rotated to the w orientation.
In this case, it can be rotated and transmitted by setting the machine to
mixed original.
Refer to “Sending an original of varying sizes by a single operation (Mixed
Original)” on page 6-33.
2
Note
When you do not wish to conduct auto rotation, contact your technical
representative.