2 interface used for connection, Usb interface, Ethernet – Konica Minolta Bizhub 215 User Manual

Page 14: Connection diagram

Advertising
background image

bizhub 215

2-6

2.2

Operating environment

2

2.2.2

Interface used for connection

To connect this printing system to the computer, the following interfaces can be used.

USB interface

Use this interface to use this printing system via a USB connection. The USB interface can be connected to
a computer running Windows. A USB cable is required for connection. Use a type A (4 pin, male) or type B
(4 pin, male) USB cable.

Ethernet

Use this interface to use this printing system via a network connection.
Optional Image Controller IC-209 or Network Card NC-504 is required.
It supports 100Base-TX and 10Base-T standards. In addition, TCP/IP (LPD/LPR, IPP) and Web service pro-
tocols are supported.

Connection diagram

The printer cables are connected to each port on this machine.

Back side of the machine (Standard printer controller)

1. USB port (type B) for USB 2.0/1.1

Advertising