Konica Minolta Bizhub 215 - Manual (Page 27)

bizhub 215 3-11
3.4 Manual installation using the Add Printer Wizard 3
13
Follow the instructions on the pages that follow.
% If the [User Account Control] window appears, click [Continue] or [Yes].
% When the Verify the publisher dialog box of [Windows Security] appears, click [Install this driver soft-
ware anyway].
14
Click [Finish].
15
After finishing the installation, ensure that the icon for the installed printer appears in the [Printers] or
[Devices and Printers] window.
16
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Once the settings for the printer have been configured, you can use the printer in the same way as a general
local printer.
For network connection (Web service print)
In Windows Vista/7/Server 2008/Server 2008 R2, printers supporting the Web service print function on the
network can be located and installed.
d
Reference
To install a different printer driver in the computer where one has already been installed, you must uninstall
the whole package of the currently installed printer driver. For details, refer to page 3-17.
Settings for the machine
To use the Web service print, you must configure the network settings for the machine in advance.
d
Reference
For details on the network settings of this machine, refer to "Network settings" and PageScope Web Con-
nection - [Network] - [WSD Configuration] of [User's Guide Network Administrator].
Recognizing the printer driver from the Network window
When using Web service print, install the printer driver before having the system recognize it using plug and
play.
0 Administrator authority is required for installation.
1
Install the printer driver for this machine.
% Install the printer driver using the installer or Add Printer Wizard.
The printer driver can be installed in any port.
For details, refer to page 3-5 or page 3-7.
2
Turn on the power of the machine while it is connected to the network.
Since the printer is searched for, be sure to connect the machine to the network.
3
To use the Web service print, check that [Network discovery] is enabled in [Network and Sharing
Center] on the computer.
4
Open the [Network] window.
% In Windows Vista/Server 2008, click [Start], then [Network].
% In Windows 7/Server 2008 R2, open [Computer] and click [Network].
If [Network] does not appear in [Computer], click the [Network and Internet] category in [Control
Panel], then click [View network computers and devices].
Connected computers and devices are detected.
Items to be configured Description
IP address In [NETWORK SETTING] on the Control Panel of this machine, spec-
ify the IP address.
Web Service Settings In [WSD Configuration], enable [Use WSD Browsing].