Konica Minolta Bizhub 215 - Manual (Page 32)

bizhub 215 3-16
3.4 Manual installation using the Add Printer Wizard 3
13
Follow the instructions on the pages that follow.
14
Click [Finish].
% When the "Windows logo testing" or [Digital Signature] window appears, click [Continue] or [Yes].
15
After finishing the installation, ensure that the icon for the installed printer appears in the [Printers and
Faxes] window.
16
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Once the settings for the printer have been configured, you can use the printer in the same way as a general
local printer.
For local connection
When this machine is connected via a USB port, the printer driver can be installed with plug and play.
Tips
- When a USB connection is used, the printer driver is installed easily with the plug and play feature. How-
ever, it can also be installed using the Add Printer Wizard. To use the Add Printer Wizard, select the
USB port to be connected in the [Choose a printer port] section.
1
Connect this machine to the computer using a USB cable, and then start the computer.
NOTICE
When starting up the computer, do not plug in or unplug the cable.
2
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
% The required CD-ROM varies depending on the printer driver. Select the CD-ROM corresponding
to the printer driver used.
3
Turn on the main power of this machine.
The [Found New Hardware Wizard] dialog box appears.
% If the [Found New Hardware Wizard] dialog box does not appear, turn this machine off, then on
again.
In this case, turn off this machine, and then wait approximately 10 seconds before turning it on
again. If you turn the printer on immediately after turning it off, it may not function correctly.
% If the screen for specifying "Windows connect to Windows Update" appears, select [No, not this
time].
4
Select [Install from a list or specific location (Advanced)] and click [Next >].
5
Select [Include this location in the search:] from [Search for best driver in these locations] and click
[Browse].
6
Select a desired printer driver folder in the CD-ROM, and then click [OK].
% Select a folder according to the printer driver, operating system, and language to be used.
7
Click [Next >], and then follow the instructions on the pages that follow.
8
Click [Finish].
% When the "Windows logo testing" or [Digital Signature] window appears, click [Continue] or [Yes].
9
After finishing the installation, ensure that the icon for the installed printer appears in the [Printers and
Faxes] window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.