Konica Minolta Bizhub 215 - Manual (Page 21)

bizhub 215 3-5
3.3 Installation using installer 3
3.3 Installation using installer
The installer automatically detects the printer on the same TCP/IP network as your computer or the machine
connected via USB to your computer, and allows you to install the required printer driver. You can also install
the printer driver by manually specifying the connection destination.
The printer drivers that can be installed using the installer are PCL driver, GDI driver, XPS driver and fax driver.
3.3.1 Operating environment of the installer
Tips
- Administrator authority is required for installation.
- If a wizard window for adding new hardware opens when using USB connection, click [Cancel].
- When you install the printer driver, WIA and TWAIN scan drivers are installed at the same time.
3.3.2 For USB connection
The USB cable must be connected during the last installation step. Do not connect the USB cable to this
machine until a message appears on the screen instructing you to connect the cable.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
% The required CD-ROM varies depending on the printer driver. Select the CD-ROM corresponding
to the printer driver used.
2
Open the printer driver folder on the CD-ROM, and double-click [Setup.exe].
% If the [User Account Control] screen appears, click [Continue] or [Yes].
The installer starts.
3
Select a language, then click [OK].
4
Click [Next].
5
After checking all terms in the license agreement, select [I accept the terms of the License Agreement],
then click [Next].
% If you disagree, you will not be able to install the driver.
6
Select this machine in [Select Model].
% Select [KONICA MINOLTA XXX PCL XPS] if the optional Image Controller IC-209 is already in-
stalled when installing the XPS driver.
7
Select port [USB] to connect, then click [Next].
% In Windows Vista/Server 2008/7, when the Verify the publisher dialog box of [Windows Security] ap-
pears, click [Install this driver software anyway].
% In Windows XP/Server 2003, when the [Windows logo testing] or [Digital Signature] window ap-
pears, click [Continue Anyway] or [Yes].
The installation starts.
Operating system Windows XP (e86/e64, SP2 or later)
Windows Server 2003 (e86/e64)
Windows Vista (e86/e64)
Windows Server 2008 (e86/e64)
Windows Server 2008 R2 (e64)
Windows 7 (e86/e64)
CPU Any processor of the same or higher specifications as recommend-
ed for your operating system
Memory Memory capacity as recommended for your operating system
Sufficient memory resource is required for your operating system
and the applications to be used.