3 setup procedure, 1 for local connection (usb port), 2 for network connection – Konica Minolta Bizhub 215 User Manual

Page 16: Setup procedure -8, For local connection (usb port) -8, For network connection -8

Advertising
background image

bizhub 215

2-8

2.3

Setup procedure

2

2.3

Setup procedure

To use this printing system, you must complete the setup in advance.

The setup refers to a series of procedures for connecting the machine to the computer and installing the print-
er driver to the computer.

Perform the setup using the following procedures.

2.3.1

For local connection (USB port)

1

Connect this machine to the computer.

2

Install the printer driver.

% If the standard printer controller is installed, install the GDI printer driver.

% If optional Image Controller IC-209 is installed, install the PCL printer driver.

% When you install the printer driver, WIA and TWAIN scan drivers are installed at the same time.

2.3.2

For network connection

1

Connect this machine to the computer.

2

Check that the computer to be used is connected to the network.

3

Specify the IP address of this machine, and then connect it to the network.

4

Change the network settings for this machine according to the connection method or protocol.

% LPR: From [TCP/IP Configuration]-[LPD Setting], enable LPD printing.

% Port 9100: In [IPv4 Configuration], enable the RAW port number (initial setting: [9100]).

% IPP: In [IPP Configuration], enable IPP printing.

% Web Service Print: In [WSD Configuration], enable [Use WSD Browsing].

% When you install the printer driver, WIA and TWAIN scan drivers are installed at the same time.

5

Install the printer driver.

% If Network Card NC-504 is installed on the standard printer controller, install the GDI printer driver.

% If optional Image Controller IC-209 is installed, install the PCL printer driver.

% Specify the network port for the printer driver according to the connection method or protocol.

Tips

-

After installing the printer driver, perform test print to make sure that the connections are made prop-
erly.

d

Reference

For details on the network settings, refer to the [User's Guide Network Administrator].

The procedure for installing the printer driver varies depending on the connection method, operating system
of the computer, and printer driver. For details, refer to page 3-2.

To update an existing printer driver, uninstall it first. For details, refer to page 3-17.

Advertising