Konica Minolta KIP Color 80 - Manual (Page 32)

1-27
3. Arrange the edges of multiple media, put them on the Bypass Feeder by landscape position,
and move them forward until contacted to feeding roller.
4. Output a copy/print job from the output device.
Feeding roller
NOTE
As curled cut sheet media will cause a mis-feed, straighten the media as far as possible
before printing. And set the media by “curl down” direction as a mis-feed can be avoided.
Setting of media by “curl up” direction tends to result in a mis-feed.
Correct (curl down) Incorrect (curl up)