Konica Minolta KIP Color 80 - Manual (Page 69)

1-64
2. 9.12 User Mode 12 (Test Print setting – Output mode)
It is possible to set the output mode of Test Print to any of the following 3.
Operation mode Description
Normal test print mode 1 sheet of internal test pattern is printed out. This is
a popular way of test printing, and used for checking
the printed image. (User can not specify the test
pattern.)
Color Registration V calibration mode 3 sheets of exclusive calibration pattern are printed
out in different paper length. Calibration of Color
Registration V is performed at the same time.
Color Registration H calibration mode 1 sheet of exclusive calibration pattern is printed out.
Calibration of Color Registration H is performed at
the same time.
1. Press the Menu Key 12 times to select the User Mode 12.
2. Press the Enter Key. The setting value on the right hand flashes and becomes changeable.
Menu Enter Online Menu Enter Online
Menu Enter Online Menu Enter Online
NOTE
“Color Registration V” and “Color Registration H” are the calibration processes to place
4 color (CMYK) images correctly on the printing media. It is unnecessary for the user to
make these calibrations in usual situation. Rather, it is not recommended to make calibration
unless the service personnel ask you to do so.
Ask your service personnel for more detail about Color Registrations V and H.