Konica Minolta KIP Color 80 - Manual (Page 93)

1-88
3. 2. 5 Mis-feed around the Bypass Feeder Region
(Code: J-0105, J-0205 & J-0405)
When the roll media is mis-fed in the Bypass Feeder, any of J-0105, J-0205 and J-0405 is
indicated. (Refer to the following section picture for the location of mis-fed media.)
Bypass Feeder region
Remove the mis-fed media as instructed in below.
1. Open both the Bypass Feeder and the Roll Deck 1, and remove the mis-fed media.
2. Close both the Bypass Feeder and the Roll Deck 1.
NOTE
Mis-Feed / Open Location Indicator does not inform the location of the mis-feed in the
Bypass Feeder region because there is no concerning LED lamp.
Bypass Feeder
Roll Deck 1
Bypass Feeder
Roll Deck 1