AT&T 5845 - Manual (Page 64)

REMOTE ACCESS COMMANDS
FUNCTION: COMMAND:
Play messages Press , then enter the appropriate
in a mailbox mailbox number( , , or ). The system
plays new messages. If there are no new
messages,the system plays old messages.
Repeat a message Press while message is playing;each
press backs up another message.
Skip a message Press while message is playing;each
press advances another message.
Stop Press .
Save messages Hang up.
Delete message Press while message is playing.
Review announcement Press ; system plays announcement,
then beeps.
Record announcement Press ; after beep, record
announcement,press to stop.
System plays back announcement.
Record memo Press ; then mailbox number where
you want memo recorded;speak after
beep;press
to exit.
End remote access call Press .
Turn system off Press ; the system announces,
“Machine off.” Press again to turn
the system back on.
Turn system on When system is off, it answers after 10
rings and announces,“Please enter your
remote access code.” Enter your remote
access code.
¥
NOTE: If no key is pressed within 10 seconds of entering remote
access code, the voice menu will be announced. After the voice
menu announcement, if no key is pressed within 20 seconds, the
remote access call will automatically end.
6 1
5840_CIB_2ATT 2003.3.5 6:12 PM Page 60