Answering system – AT&T 5845 User Manual
Page 73
![background image](/manuals/47530/73/background.png)
ANSWERING SYSTEM
PROBLEM
SOLUTION
If
appears in the
You need to reset the cl o ck . The answe ri n g
message window:
system clock is not set automatically with
incoming Caller ID information.
PROBLEM
SOLUTION
If the system does not
• Make sure you are calling from a touch
respond to commands
tone phone. When you dial a number,
from a remote touch
you should hear tones. If you hear clicks
tone phone:
instead,the phone is not a touch tone
telephone.
• The answering system may not detect
the Remote Access Code while your
announcement is playing. Try waiting
until the announcement is over before
entering the code.
• Make sure you enter your Remote Access
Code correctly.
• There may be noise or interference on
the phone line you are using. Press keys
firmly.
PROBLEM
SOLUTION
If your outgoing
• When you record your announcement,
announcement isn’t
make sure you speak in a normal tone of
clear:
voice, about nine inches from the base.
• Make sure there is no “background”noise
(TV, music,etc.) while you are recording.
7 0
5840_CIB_2ATT 2003.3.5 6:12 PM Page 69