AT&T 5845 - Manual (Page 69)

PHONE
PROBLEM SOLUTION
To re-initialize the 1 Disconnect the power to the base.
handset and base:
2 Remove spare battery pack (if installed).
3 Remove the handset battery pack.
4 Wait at least 15 seconds.
5 Insert the handset battery pack.
6 Connect the power to the base.
PROBLEM SOLUTION
If you hear noise or • You may be out of range. Move closer to
interference when the base.
using the phone: • Household appliances plugged into the
same circuit as the base can sometimes
cause interference. Try moving the
appliance or the base to another outlet.
• The layout of your home or office may
be limiting the operating range. Try
moving the base to another location,
preferably on an upper floor.
• Using the handset near household
appliances (microwaves,computers,
televisions,stereos,etc.) can sometimes
cause interference. Move away from
appliances while using the handset.
6 6
PROBLEM SOLUTION
If your handset dis-
plays ENTER BASE ID
or NO BASE SUB-
SCRIPTION It is necessary to register the handset
to the base.Please follow instructions
under REGISTER THE HANDSET on
page 5 of this manual.
5840_CIB_2ATT 2003.3.5 6:12 PM Page 65