AT&T 5845 - Manual (Page 7)

3 Install the handset battery.
Use only AT&T Battery 2401,SKU# 91077.
4 Charge the handset battery.
•
Place the handset in the base.
• Charge the battery at least 12 hours. After the first charge,
the battery will charge in eight hours.
5 Check for dial tone.
•
After the batteries are ch a rge d , lift the handset and pre s s
; you should hear a dial tone.
4
b) Align the contacts and
place the battery pack in
the battery compartment.
a) Remove battery
compartment cover by
pressing on indentation
and sliding downward.
c ) Replace cover by
sliding it on its
t ra ck up over
b a t t e ry case until
it snaps fi rm ly
into place.
5840_CIB_2ATT 2003.3.5 6:11 PM Page 3