Xerox 4590 - Manual (Page 29)

Xerox 4590/4110 Copier/Printer System Administration Guide 1-17
1. Overview
7. Select
Auto Power Saver
, and select
Change Settings
.
8. Using the up/down arrow buttons, configure a power saver
mode migration time from 1 to 240 minutes, in 1 minute
increments.
•
From Last Selection to Low Power Mode:
Set the time
to move to the
Low Power Mode
after the last operation.
NOTE: The default for From Last Selection to Low
Power Mode is 15 minutes.
•
From Last Selection to Sleep Mode:
Set the time to
move to the
Sleep Mode
after the last operation.
NOTE: The default for From Last Selection to Sleep
Mode is 60 minutes. Configure the From Last Selection
to Sleep Mode time to be longer than the From Last
Selection to Low Power Mode time.
9. Press
Save
.
10. Select
Close
repeatedly until the
System Setting/System
Settings
screen is displayed.
11. Select
Exit
to exit the System Administration mode.