Xerox 4590 - Manual (Page 345)

Xerox 4590/4110 Copier/Printer System Administration Guide 8-187
8. Setups
Failed Access Log
If the number of times that authentication fails within a set time
exceeds the
Failed Attempts
value set here, then an error is
logged. You can set the failing times within the range from 1 to
600.
1. Select
Failed Access Log
.
2. Enter the failing times using the numeric keypad.
Store User Details
You can set the destination to save authentication information.
Select NVM or hard disk.
NOTE: This item appears when Network Access is selected from
the Login Setup/Auditron Mode screen.
For more information,
refer to Login Setup/Auditron Mode on page 8-192.