AT&T DECT TL9178 - Manual (Page 16)

Getting started
11
Installation options
The telephone base is set for desktop use. It is possible to change to a
wall mounting position by installing the wall mount bracket provided. Wall
mounting requires a telephone outlet wall mounting plate with mounting
studs that may require professional installation. You can purchase the
mounting plate from many hardware or consumer electronics retailers.
Desktop to wall mount installation
To change the telephone base to the wall mount position, make sure that
you first unplug the telephone line cord and power adapter cord from the
wall outlets before you begin. In addition, to prevent possible damage,
remove the handset from the telephone base.
2. Push the telephone base down until it clicks into place on both sides of the
bracket.
1. Position the telephone base as shown below, and insert the extended tabs of
the bracket into the slots under the telephone base.