AT&T DECT TL9178 - Manual (Page 45)

Telephone operation
40
Call transfer using intercom
Models TL91�78 (three or more handsets)
1. When on an outside call, press
MENU/
SELECT
to enter the feature menu.
2. Use DIR / CID to scroll to
> TRANSFER, then press
MENU
/SELECT. The
screen shows INTERCOM TO:
3. Enter the handset number 1-9 or, for handsets
10, 11 and 1�, enter *0, *1 or *�, respectively.
The display shows
CALLING HANDSET X,
with X being the handset number. The called
handset rings, and its screen shows HANDSET
X IS CALLING.
4. On the ringing handset, press HOME
/FLASH
or SPEAKER to answer the intercom call. You
can now talk without the outside caller hearing
the conversation.
5. Press OFF
/CLEAR
on the transferring
handset or place it in the telephone base or
handset charger to complete the transfer.
The transferring handset’s screen shows
CALL TRANSFERED and the other handset is
automatically connected to the outside call.
-OR-
Press HOME
/FLASH
or CELLULAR
(depending on which call is being transferred)
on the destination handset to let both parties
conference with the external line.
NOTES:
1. Before the intercom call is
answered, press and hold
OFF/
CLEAR
to cancel
the transfer and return to
the outside call.
2. If the called handset does
not answer the intercom
call within 100 seconds,
is in directory or caller ID
history mode, or is out
of range, the transferring
handset shows UNABLE
TO CALL TRY AGAIN
on its screen and
automatically returns to
the outside call.
3. You can end the intercom
call and return to the
outside call by pressing
the HOME/FLASH or
CELLULAR (depending
on which call is being
transferred) on the
transferring handset, or
pressing OFF/
CLEAR
on
the called handset.