AT&T DECT TL9178 - Manual (Page 41)

Telephone operation
36
Chain dialing
Use this feature to initiate a dialing sequence
from numbers stored in the directory, caller ID
history or redial list while you are on a call. This
feature is available only when you are making a
HOME call.
Chain dialing can be useful if you wish to access
numbers other than phone numbers (such as bank
account information or access codes) from the
directory, caller ID history or redial list.
Directory access while on a call
1. Press
MENU/
SELECT
twice.
2. Press DIR / CID to scroll to the desired
number.
3. Press MENU/
SELECT
to dial the number shown.
Caller ID history (call log) access while on a call
1. Press
MENU/
SELECT.
2. Press DIR / CID to scroll to >CALL
LOG.
3. Press
MENU
/SELECT.
4. Press DIR / CID to scroll to the desired
number.
5. Press MENU/
SELECT
to dial the number shown.
Last number redial while on a call
Press
REDIAL/
PAUSE
to show and dial the
most recently dialed number. If you press
REDIAL/
PAUSE
again within two seconds, the
number is not dialed.
NOTES:
1. You cannot edit a
directory entry while
you are on a call. For
more details about the
directory, seepage 41.
2. You cannot copy a
caller ID entry into the
directory while you
are on a call. For more
details about the caller
ID history, see page 48.
3. If you press
REDIAL/
PAUSE
while
on a call, you can only
view the most recent
call, and you cannot
erase the entry. For
more details about the
redial memory, see
page 31.
4. Press and hold
OFF/
CLEAR
to exit
redial, directory or
caller ID history when
you are on a call.