AT&T DECT TL9178 - Manual (Page 37)

Telephone operation
32
Handset operation
• Press HOME/
FLASH
or SPEAKER, then
REDIAL
/PAUSE
to call the most recently called
number (up to 30 digits).
While reviewing the redial memory, press
DELETE
/MUTE
to delete the displayed number.
Handset locator
The handset locator feature is useful if you misplace
a handset.
To start the paging tone:
• Press
HANDSET LOCATOR at the telephone
base to start the paging tone on the handsets for
60 seconds.
NOTE: When paging, if you press OFF/
CLEAR
or
DELETE/
MUTE on a handset, the ringer of the handset is
silenced but the page will not stop.
To stop the paging tone:
• Press
HOME
/FLASH,
SPEAKER
,
or any dial
pad key (0-9, *, or #) on the handset,
–OR–
• Press
HANDSET LOCATOR on the telephone
base.
NOTE: The handset ringer volume also determines the
volume of the paging tone. If the handset ringer volume
level is set to off, that handset is silent for all calls and
paging (page 22).
**PAGING**