Xerox WorkCentre M118i-6288 - Manual (Page 106)

7 CentreWare Internet Services
106 Xerox CopyCentre/WorkCentre 118 User Guide
Internet Services Settings Auto Refresh Interval
Use to enter a time interval when the contents of the browser
display will be refreshed automatically.
Display Language – Allows you to select the language to be
displayed.
Administrator Mode
Allows you to specify whether to appoint the Key Operator
for CentreWare Internet Services settings.
Administrator Name
Enter the Key Operator name.
Administrator Password
Enter the Key Operator password.
Re-enter Password
Allows you to verify the Key Operator password by re-
entering the same password.
Port Status This page displays the port settings and allows you to select
whether to enable or disable different ports used in the
printer.
For more information about these ports, refer to the System
Administration Guide.
Parallel
Select the check box to enable.
USB
Select the check box to enable.
EtherTalk
Select the check box to enable.
SMB
Select the check box to enable. You can also configure the
Transport Protocol to be used. To enable the Transport
Protocol, select the check box of TCP/IP and/or NetBEUI.
NetWare
Select the check box to enable. You can also configure the
Transport Protocol to be used. To enable the Transport
Protocol, select the check box of IPX/SPX and/or TCP/IP.
LPD
Select the check box to enable.
SNMP
Select the check box to enable. You can also configure the
Transport Protocol to be used. To enable the Transport
Protocol, select the check box of UDP and/or IPX.
IPP
Select the check box to enable.
Port9100
Select the check box to enable.
UPnP
Select the check box to enable.
Send E-mail
Select the check box to enable.
Mail Notice Services
Select the check box to enable.
Internet Services
Select the check box to enable.
Feature name Setting items