Xerox WorkCentre M118i-6288 - Manual (Page 174)

11 Problem Solving
174 Xerox CopyCentre/WorkCentre 118 User Guide
3. Rotate the green lever A1 in the
direction of the arrow to feed the paper
from the top of the fuser unit.
4. Pull out the paper from the machine in
the direction of the arrow.
5. Close Cover A until it latches, and then
close Tray 5 (bypass tray).
Green Lever A2
1. Open Tray 5 (bypass tray) if necessary,
and then open Cover A while lifting up
the release lever.
2. If the jammed paper is inside the fuser
unit, lower the green lever A2 in the
direction of the arrow to open the fuser
unit cover.
3. If the jammed paper is found in the fuser
unit, carefully remove it from the
machine while holding down the green
lever A2.
NOTE: Do not touch the fuser unit because
it may be hot.
4. Close the Cover A until it latches, and
then close Tray 5 (bypass tray).