Xerox WorkCentre M118i-6288 - Manual (Page 193)

Fault Codes
Xerox CopyCentre/WorkCentre 118 User Guide 193
016-790 Insufficient memory for e-mail. Do the following:
• Reduce scanning resolution.
• Decrease the scanning area.
• Add memory to print.
081-702 A fax transmission parameter was wrong. Check the settings of the print
driver.
081-703 There was insufficient memory while transmitting a fax. Split the
document to send, lower the resolution, or delete the unnecessary data
in the memory.
081-704 User cancels the process of the job.
081-705 The feature specified is not available. Check the status of the machine.
081-706,707 An error occurred while using the fax feature. Turn the power off and on
after the screen on the control panel is off.
081-709 A transmission error occurred while using the fax feature. Check the
telephone line and send the document again.
081-720,722 An error occurred in the machine. Turn the power off, and then back on
after the screen on the control panel is off.
081-721 User cancels the process of the job.
C1-3, C2-2, C2-3,
C3-1, C3-2, C3-3,
C4-0, C4-1, C4-2,
C4-3 Paper jam is occurred in the paper tray. Refer to Paper Jams on
page 172.
C6-1, C6-2 Paper jam is occurred in the duplex kit. Refer to Paper Jams on
page 172.
C8-2, C8-3, C8-4 Paper jam is occurred in the paper tray. Refer to Paper Jams on
page 172.
C8-6 Paper jam is occurred in the duplex kit. Refer to Paper Jams on
page 172.
C9-3 Paper jam is occurred in Tray 5 (bypass tray). Refer to Paper Jams on
page 172.
E1-6 Paper jam is occurred in the inner of the machine. Refer to Paper Jams
on page 172.
E1-1, E1-2, E3-1 Paper jam is occurred in the exit. Refer to Paper Jams on page 172.
E3-6 Paper jam is occurred in the exit. Refer to Paper Jams on page 172.
E8-2 Paper jam is occurred in the duplex kit. Refer to Paper Jams on
page 172.
Code Description and Corrective Action