Installation – Xerox WorkCentre XD103f Digitaler Kopierer - Laserdrucker-10252 User Manual
Page 14
Advertising
6
Installation
As you unpack the WorkCentre, familiarize yourself with its contents. After
the WorkCentre is installed, and the Ready Indicator is lit, the WorkCentre
is ready to make copies.
IMPORTANT: Save the carton and packing materials. They should be
used to repack the WorkCentre if it has to be shipped for servicing or in
case you move.
* Note: To ensure reliability of the WorkCentre use the IEEE-1284
compliant parallel cable that is supplied with the machine. Only cables
labeled “IEEE-1284” can be used with your WorkCentre.
Drum cartridge
(installed in the
machine)
Packing material
Power cord
Starter toner
cartridge
IEEE-1284
Parallel Cable *
User documentation/
Installation CD
Advertising
This manual is related to the following products: