Xerox WorkCentre XD103f Digitaler Kopierer - Laserdrucker-10252 - Manual (Page 61)

53
Problem Probable Cause Remedy
The computer CPU
specification may be
incorrect. Check that the computer
meets the minimum
specification.
Printing is too
slow The computer parallel port
may not be set for high
speed communications. If your computer is equipped
with an ECP parallel port,
enable this mode of
operation. Refer to the
Enabling High Speed
Printer Communications
section and your computers
user guide.
If using Windows 3.1x, the
background printing item
in the options menu of
print manager may be set
incorrectly. Select Background Printing
from the options menu of
print manger.
If using Windows 95, the
spool setting may be set
incorrectly. Point to the Start Task bar
and then click Settings then
Printers. Click the Xerox
Document WorkCentre XD
with the right mouse button.
Click Properties and then
spool settings on the details
tab. Select the desired
setting from the available
choices.
Computer may not have
enough memory (RAM). Install more RAM in your
computer.
Print Job to large Reduce resolution from 600
dpi to 300 dpi.
Irregular faded
patches of
print There is a paper quality
problem. Use only paper that meets
the specifications required by
the printer.
Toner may be unevenly
distributed. Remove the toner cartridge
and shake it gently to evenly
distribute the toner. Then
reinstall the toner cartridge.
Black staining There is a paper quality
problem. Use only paper that meets
the specifications required by
the WorkCentre.