Xerox WorkCentre XD103f Digitaler Kopierer - Laserdrucker-10252 - Manual (Page 38)

30
Feature Program
Number
Option Number
* Factory Setting
Auto Paper Tray Switching: When
enabled, the copier will automatically
switch to another paper tray when the
selected tray runs out of paper.
(Model XD104/ 105f/ 120f/ 130df/ 155df
only.)
11 0 – On
1 – Off *
Single Pass Feeder Contrast
Adjustment/Automatic Document
Feeder: The copy exposure range
may be adjusted when the copy
image is consistently too light or too
dark.
(Models XD103f/ 105f/ 120f/ 125f/ 130df/
155df only.)
12 0 – lightest
1 – lighter
2 – Normal *
3 – darker
4 – darkest
Return to Print Mode: This feature
allows you to select the time it takes
for the copier to return to the print
mode after a copy job is complete. 14 0 – 60 seconds *
1 – 90 seconds
2 – 120 seconds
3 – 150 seconds
4 – 180 seconds
5 – Off - no time out
Default 1-sided/2-sided Mode: This
feature allows you to select the default
copy mode.
(Models XD130df/155df only.)
17 0 – 1 to 1 *
1 – 1 to 2
2 – 2 to 2
3 – 2 to 1