Xerox WorkCentre XD103f Digitaler Kopierer - Laserdrucker-10252 - Manual (Page 41)

33
Programmable Feature Setting 10
Use the following procedure to change the preset Reduction/Enlargement
default setting (
). This feature allows you to set a specific preset
reduction or enlargement between 50 – 200%.
1. Select the Toner Saver mode.
2. Press again and hold the Image Quality
key for approximately 4 to 6 seconds.
• The light next to Auto mode will light.
• The lights within the WorkCentre
Diagram will flash.
50% 200%
10 1
W o r k C e n t r e
3. Press the 10 key until the number 10 is
displayed.
4. Press Start.
• The current reduction/enlargement
setting will flash.
50% 200%
D O C U M E N T
10 1
W o r k C e n t r e
5. Press the variable percentage keys until
the desired percentage is displayed.
6. Press Start to store the selection.
7. Press the Clear key to continue making
other changes. Press the Image
Quality key to return to the copy mode.