Making copies on the automatic document feeder – Xerox WorkCentre XD103f Digitaler Kopierer - Laserdrucker-10252 User Manual

Page 26

Advertising
background image

18

Making Copies on the Automatic Document
Feeder

(XD130df/155df)

The Automatic Document Feeder (ADF) allows you to automatically make
single sided or two-sided copies. The ADF holds up to 30 originals
(20 lb/80 gsm). Ensure originals are in good condition, and that all staples
and paper clips have been removed. Use the document glass to make
copies from transparencies, facsimile paper, or originals having other
unusual characteristics. For reliable copying operation, use originals within
the following ranges:

Paper weight range: 16 to 24 lb/60 to 90 gsm

Paper size range: 5.5

×

8.5"/A5 (Short Edge feed only)

8.5

×

11"/A4 and 8.5

Ч

14"/216

Ч

353 mm

The ADF comes from the factory with the Auto Start feature disabled.
Refer to Customizing Your WorkCentre section of this User Guide for
information about changing this setting.

Note: Automatic two-sided copying is available only in the copying mode,
not the print mode.

The available copy options are:

Icon

Original

Copy

Max

Quantity

(2

!

1)

Two-sided

Single sided

100 sets

(2

!

2)

Two-sided

Two-sided

1 set

(1

!

2)

Single sided

Two-sided

1 set

(1

!

1)

Single sided

Single sided

100 sets

Single sided original to single sided copies (1

!

!

!

!

1)

This mode will create single sided copies from your originals.

1. Place the originals face up in the ADF.

2. Select the

icon (1 to 1) and any additional features

and the desired quantity.

3. Press Start to begin copying.

The WorkCentre will produce the requested number of
uncollated (1,1,1…2,2,2…3,3,3…) single sided sets.

Advertising