Xerox WorkCentre XD103f Digitaler Kopierer - Laserdrucker-10252 - Manual (Page 21)

13
Paper Specifications
Paper Storage
Note: Paper affected by humidity, and curled paper can cause jams and
copy quality problems.
For reliable copier operation and good copy quality, Xerox recommends
that paper be stored:
• on a flat surface.
• in a closed container.
• in a low humidity area.
• tightly wrapped, if the ream is partially used.
The Specifications Chart below provides information about the types of
paper that can be used at each of the paper input areas.
Paper Input Paper Tray 1 and 2 Alternate Paper Tray/
Paper Tray Bypass
Paper Sizes 5.5
×
8.5" to 8.5
×
14" /
A5 to 216
×
356mm
3.5
×
5.5" to 8.5
×
14" /
A6 to 216
×
356mm
Paper Weights
Optimum
Range
20 lb / 80 gsm
15 – 24 lb /
56 – 90 gsm
20 lb / 80 gsm
14 – 34 lb /
52 – 130 gsm
Paper Capacities
Copy, letterhead, and
predrilled
XD100/125/125f
XD102/103f
XD104/105f
XD120f
XD130df/ 155df
20 lb / 80 gsm
250 sheets
200 sheets
250 sheets
2
×
250 sheets
2
×
250 sheets
20 lb / 80 gsm
single sheet
single sheet
multi-sheet
single sheet
multi-sheet
Labels, Envelopes,
and Transparencies * No Yes (1 at a time)
* Use labels, envelopes, and transparencies specifically designed for
copiers and laser printers (high temperatures).