AEG BE2003021W - Manual (Page 11)

SYM-
BOL
FUNCTION DESCRIPTION
TIME OF DAY To set, change or check the time of day. Refer to
“Setting the time”.
DURATION To set how long the appliance must operate. First
set an oven function before you set this function.
END To set when the appliance must be deactivated.
First set an oven function before you set this func-
tion. You can use Duration and End at the same
time (Time Delay) to set the time when the appli-
ance must be activated and then deactivated.
Press again and again to
change the clock function.
Press to confirm the settings
of the clock functions, or wait 5
seconds for the setting to be
confirmed automatically.
6.1 Setting the DURATION or
END
1. Press again and again until the
display shows or .
or flashes in the display.
2. Press or to the set minutes.
3.
Press to confirm.
4. Press or to set the hour.
5. Press to confirm. An acoustic sig-
nal sounds for 2 minutes after the
time ends.
or symbol and
time setting flash in the display. The
oven stops.
6. Press any button or open the oven
door to stop the acoustic signal.
If you press when you set the
hours for DURATION , the
appliance goes to setting of the
END
function.
6.2 Setting the MINUTE
MINDER
1. Press .
and "00" flash in the display.
2.
Press or to set the MINUTE
MINDER. At first, the time is calcula-
ted in minutes and seconds. When
the time you set is longer than 60
minutes, the symbol
comes on in
the display. The appliance now cal-
culates the time in hours and mi-
nutes.
3. The MINUTE MINDER starts auto-
matically after five seconds.
After 90% of the set time, an
acoustic signal sounds. Press a
button to stop the signal.
4. When the set time ends, an acoustic
signal sounds for two minutes.
"00:00" and
flash in the display.
Press a button to stop the signal.
If you set the MINUTE MINDER
when the DURATION or END
function operates, the symbol
comes on in the display.
6.3 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on immedi-
ately when the oven starts to heat.
To reset the Count Up Timer, press and
hold
and .
You cannot use the Count Up
Timer when Duration or End
function operates.
ENGLISH
11