AEG BE2003021W - Manual (Page 8)

Core temperature sensor
To measure how far the food is cooked.
4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".
4.2 Setting the time
After the first connection to the mains,
all symbols in the display are on for
some seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows
and "12:00". "12"
flashes.
1. Press or to set the current
hour.
2.
Press to confirm (necessary only
for the first setting. Later the new
time will be saved automatically after
5 seconds).
The display shows and the set
hour. "00" flashes.
3. Press or to set the current mi-
nutes.
4. Press to confirm (necessary only
for the first setting. Later the new
time will be saved automatically after
5 seconds) .
The Temperature / Time display
shows the new time.
Changing the time of day
You can change the time of day only if
the oven is off.
Press
. The set time and symbol
flash in the display. To set a new time,
use the procedure "Setting the time".
5. DAILY USE
WARNING!
Refer to the Safety chapters.
To use the appliance, press the control
knob. The control knob comes out.
5.1 Activating and
deactivating the appliance
1. Turn the knob for the oven functions
to select an oven function.
2. Turn the knob for the temperature
/ to set a temperature.
3. To deactivate the appliance, turn the
knob for the oven functions to the
off position ("0") .
8 www.aeg.com