AEG BE2003021W - Manual (Page 12)

7. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
7.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature. Refer to the ta-
ble for roasting.
• The core temperature. Refer to the ta-
ble for the core temperature sensor.
Only use the core temperature
sensor supplied with the appli-
ance, or genuine replacement
parts.
1. Set the oven function and the oven
temperature.
2. Put the point of the core tempera-
ture sensor (with the symbol
on
the handle) into the centre of the
meat.
3. Put the plug of the core temperature
sensor into the socket on the front of
the appliance. The display shows the
symbol of the core temperature sen-
sor and the default core tempera-
ture. When you use the core temper-
ature sensor for the first time, the
default core temperature is 60 °C.
4.
While flashes, you can use the
knob for the temperature to change
the default core temperature.
5. Press to save the new core tem-
perature, or wait 10 seconds for the
setting to be saved automatically.
The new default core temperature is
displayed during the next use of the
core temperature sensor.
6. Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
7. When the meat is at the set core
temperature, the symbol for the core
temperature and the core tempera-
ture sensor flash. An acoustic signal
sounds for two minutes. Press a but-
ton to stop the signal.
8. Remove the plug of the core tem-
perature sensor from the socket .
Remove the meat from the appli-
ance.
9. Deactivate the appliance.
Every time you put the core tem-
perature sensor in the socket,
you need to set the duration and
end time again.
When the appliance calculates
the provisional duration time for
the first time, the symbol - flashes
in the display. When the calcula-
tion ends, the display shows the
duration of the cooking. Calcula-
tions run in the background dur-
ing the cooking and the duration
value in the display is updated if
necessary.
You can change the core temperature
at any time during the cooking:
1. Press the temperature button :
– One time - the display shows the
set core temperature which
changes every 10 seconds to the
current core temperature.
– Two times - the display shows the
current oven temperature which
changes every 10 seconds to the
set oven temperature.
– Three times - the display shows
the set oven temperature.
2. Use the knob for the temperature to
change the temperature.
12 www.aeg.com