AEG AG943 - Manual (Page 10)

10
1. Batteries should always be run flat before
removed. Ergorapido must be disconnected
from the charging station when removing the
batteries. Undo the screws. Carefully lift the hood.
2. Cut the connecting cables, remove the batteries,
put tape over the visible metal areas. Place
batteries in suitable packaging.
Improper handling of the batteries may be
hazardous. Return the complete handheld unit to a
recycling station. Batteries must be removed from
the appliance before it is scrapped or recycled.
Never dispose used batteries with household waste.
Removing batteries
Removing the batteries