AEG AG943 - Manual (Page 6)

6
3. Adjust the power level by pushing the lower part of
the on/off button:
2. Start Ergorapido by pushing the on/off button.
3. Start/stop the hand unit by pushing the start
button.
1. You should regularly check that the nozzle
wheels and the brush roll are clean in order to
avoid scratching sensitive floors.
1. Remove the hand unit by pressing the release
buttons. The crevice nozzle and small brush are
stored in the charging station.
2. Attach the crevice nozzle to facilitate cleaning
of areas difficult to reach, or attach the brush for
dusting.
Vacuuming floors and carpets
Vacuuming furniture, car seats etc.
Vacuuming