AEG AG943 - Manual (Page 9)

1. First turn Ergorapido off. Push the brush roll
release button. The hatch cover will come slightly
free and the brush roll can be removed.
1. Loosen the catch and pull the hose from the
attachment. Remove any debris. Put the hose
back, lock using the catch.
2. If the wheels needs to be cleaned, remove them
carefully by using a small screwdriver.
3. Remove objects that may have become
jammed in the wheel shafts. Reassemble the
wheels by pressing them back into their tracks.
2. Lift out the brush roll and clean it. Use a sharp
object to remove threads. Reassemble the roll,
making sure it can spin freely. Close hatch cover.
Cleaning the brush roll
Cleaning the hose and wheels
To remove thicker threads or wires as well
as on models that are not equipped with the
BRUSHROLLCLEAN™ TECHNOLOGY, the brush
should be cleaned according to the following
instructions.
Cleaning 9