AEG AG943 - Manual (Page 5)

5
1. 3 blue lights: battery capacity >75%
2 blue lights: battery capacity 75-25%
1 blue light: battery capacity <25%
1 blue blinking light: battery capacity – empty
2. If a red light is lit: Unit is too hot. Clean filters,
brush roll, hose and put on charge.
3. If a red light is blinking: Motor is overloaded.
Clean brush roll.
4. When fully charged the LED’s* will turn off
and go into standby mode = much lower power
consumption, indicated with one blink per minute.
5. The red and blue light are blinking: please refer
to page 9.
1. Ergorapido: The indicator light will come on
once the Ergorapido is positioned correctly in the
charging station. When fully charged, the LED will
be on for a few seconds per minute.
2. Ergorapido Plus: The battery capacity display
lights will come on one after another as the
machine is charging after being positioned
correctly in the charging station.
3. When fully discharged, approximately 16 hours’
charging is required to regain full battery capacity
(4 hours for Ergorapido Plus). Leave Ergorapido
on charge when not used to maintain battery
performance.
Charging
Charging
Battery capacity display*
*Ergorapido Plus