Alliance Laundry Systems H242I - Manual (Page 37)

504509 35
Lint Filter
CLEAN THE LINT FILTER BEFORE DRYING EACH
LOAD. (Refer to illustration below for lint filter
location.) Cleaning the lint filter is important because a
layer or pad of lint on the filter will block the flow of air through the dryer, thus reducing the efficiency of the
dryer. The clothes will take longer to dry and energy will
be wasted.
Dryer Motor Overload Protector
The motor overload protector stops the motor in the event
of an overload. After cooling, the overload protector will
reset itself. The dryer can be restarted by pressing the PUSH-TO-START button. If the overload protector
cycles again, remove the unit from use and call the
service person to correct the problem.
. . .
LINT
FILTER
H247IE1A
. . .